912 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
enable web http access-profile
enable web http access-profile [none | <access-profile>] port <port number>
Description
Allows HTTP access on the specified (non-default) port.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to set up an access profile for a particular port number to restrict HTTP usage.
Example
The following example enables HTTP access using the access-profile named open_web on port 120:
enable web http access-profile open_web port 120
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
none Specifies to not to use an access-profile when accessing HTTP.
access-profile Specifies the name of an access-profile to use when accessing HTTP.
port number Specifies the port number to use to access HTTP.
To Next Page
Loading...
Need help?
General
