configure vlan delete elrp-poll ports
ExtremeWare Software 7.3.0 Command Reference Guide 1079
configure vlan delete elrp-poll ports
configure vlan <vlan name> delete elrp-poll ports [<portlist> | all]
Description
Disables ELRP packet transmission on ports of an ESRP-enabled VLAN.
Syntax Description
Default
All ports of an ESRP-enabled VLAN have ELRP transmission enabled.
Usage Guidelines
If you have host ports on an ESRP-enabled VLAN, you do not need to send ELRP packets to those
ports.
If you change your network configuration, and a port no longer connects to a master, slave, or
ESRP-aware switch, you can disable ELRP transmission on that port.
Example
The following command disables ELRP packet transmission for ports 3-5 on VLAN esrp1:
configure vlan esrp1 delete elrp-poll ports 3-5
History
This command was first available in ExtremeWare 6.2.2b134.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies an ESRP-enabled VLAN name.
portlist Specifies list of ports or slots and ports. May be in the form 1, 2, 3-5, 2:*, 2:5,
2:6-2:8.
all Specifies all ports in the VLAN.
To Next Page
Loading...
Need help?
General
