Extreme Networks ExtremeWare User Manual

enable stpd
ExtremeWare Software 7.3.0 Command Reference Guide 1033
enable stpd
enable stpd {<spanning tree name>}
Description
Enables the STP protocol for one or all STPDs.
Syntax Description
Default
Disabled.
Usage Guidelines
You must create one or more STP domains and configure an STPD before you can use the enable stpd
command. Use the create stpd <name> command to create an STPD.
The spanning tree name keyword is optional. You do not need to indicate an STPD name if you
enable the STP protocol for all STPDs.
Example
The following command enables an STPD named Backbone_st:
enable stpd backbone_st
History
This command was first available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
spanning tree name Specifies an STPD name on the switch.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English