Extreme Networks ExtremeWare - Create Eaps Shared-Port

create eaps shared-port
ExtremeWare Software 7.3.0 Command Reference Guide 985
create eaps shared-port
create eaps shared-port <port>
Description
Creates an EAPS shared port on the switch.
Syntax Description
Default
N/A.
Usage Guidelines
To configure a common link, you must create a shared port on each switch of the common link.
Example
The following command creates a shared port on the EAPS domain.
create eaps shared-port 1:2
History
This command was first available in ExtremeWare 7.1.
Platform Availability
This command is available on the “i” series platforms.
port Specifies the port number of the common link port.