show ipxconfig
ExtremeWare Software 7.3.0 Command Reference Guide 1589
show ipxconfig
show ipxconfig {vlan <vlan name>}
Description
Displays IPX configuration information for one or all VLANs.
Syntax Description
Default
N/A.
Usage Guidelines
This command is analogous to the
show ipconfig
command for the IP protocol. It displays summary
global IPX configuration information followed by per-VLAN information. Information includes
enable/disable status for IPX/RIP, IPX/SAP, IPX route sharing, IPX service sharing, and so on.
Example
The following command displays the IPX configuration information for VLAN
accounting
:
show ipxconfig vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
To Next Page
Loading...