352 ExtremeWare Software 7.3.0 Command Reference Guide
VLAN Commands
unconfigure vlan ipaddress
unconfigure vlan <vlan name> ipaddress
Description
Removes the primary IP address of a VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to remove the primary IP address on a VLAN. The primary IP address will be
cleared only if there are no secondary IP address(es) configured for the VLAN.
Example
The following command removes the primary IP address for the VLAN named
vlantest4
:
unconfig vlan vlantest4 ip-address
History
This command was first available in ExtremeWare 1.0.
This command was modified to enhance the multinetting implementation. It was made available in
ExtremeWare 7.3.0.
Platform Availability
This command is available on all platforms.
vlan-name Specifies the name of the VLAN for which the primary IP address is to be
unconfigured.
ip-address Specifies that the VLAN primary IP address is to be cleared.
To Next Page
Loading...