2052 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
enable wireless ports
enable wireless ports <portlist>
Description
Administratively enables a wireless port for use.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to enable wireless ports.
Example
The following command enables port 1:17:
enable wireless ports 1:17
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
To Next Page
Loading...