408 ExtremeWare Software 7.3.0 Command Reference Guide
QoS Commands
show dlcs
show dlcs
Description
Displays the status of DLCS (enabled or disabled) and the status of ports that are snooping WINS
packets.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
None.
Example
The following command displays DLCS status and data from the switch:
show dlcs
It produces output such as the following:
DLCS: Enabled
Ports: 4
History
This command was available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...