1552 ExtremeWare Software 7.3.0 Command Reference Guide
IP Multicast Commands
show pim snooping
show pim snooping {vlan <vlan name>}
Description
Displays PIM snooping information for a selected VLAN.
Syntax Description
Default
If no VLAN name is specified, PIM snooping information is displayed for all VLANs.
Usage Guidelines
Use this command to display PIM snooping information for a selected VLAN. To display PIM snooping
for a single VLAN, specify the VLAN name. If no VLAN name is specified, PIM snooping information
is displayed for all VLANs.
Example
The following command displays PIM snooping on the VLAN demo-pim:
show pim snooping vlan demo-pim
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies the name of the VLAN for which PIM snooping information will be
displayed. If no VLAN name is specified, PIM snooping information will be
displayed for all VLANs.
To Next Page
Loading...
Need help?
General
