1068 ExtremeWare Software 7.3.0 Command Reference Guide
ESRP Commands
configure vlan add ports no-restart
configure vlan <vlan name> add ports [<portlist> | all] no-restart
Description
Disables port restart for a port.
Syntax Description
Default
N/A.
Usage Guidelines
To disable port restart, you either delete the ports and then add them again with the
no-restart
option, or directly add the ports with the
no-restart
option.
Example
The following command disables port restart for ports 7-9 on VLAN esrp1:
configure vlan esrp1 add ports 7-9 no-restart
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
vlan name Specifies an ESRP-enabled VLAN name.
portlist Specifies list of ports or slots and ports. May be in the form 1, 2, 3-5, 2:*, 2:5,
2:6-2:8.
all Specifies all ports.
To Next Page
Loading...