show wireless ports interface pae-statistics
ExtremeWare Software 7.3.0 Command Reference Guide 947
show wireless ports interface pae-statistics
show wireless ports [<portlist> | all] interface [1 | 2] pae-statistics
Description
Displays Port Authentication Entity (PAE) statistics for the selected port and interface.
Syntax Description
Default
N/A
Usage Guidelines
Use this command to display the PAE statistics of the clients associated with the access point (AP).
Examples
The following example lists the output of the PAE statistics for ports 1:11 on interface 2:
show wireless ports 1:11 interface 2 pae-statistics
The output of the command is similar to:
PAE Statistics
CLIENT MAC Port Intf STATE TX RX ERRORS CLIENT ID
================================================================================
00:0D:54:98:AC:35 1:25 1 AUTHED 16 17 0 sqalab\labu
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
To Next Page
Loading...
Need help?
General
