Extreme Networks ExtremeWare User Manual

configure rip routetimeout
ExtremeWare Software 7.3.0 Command Reference Guide 1319
configure rip routetimeout
configure rip routetimeout {<seconds>}
Description
Configures the route timeout period.
Syntax Description
Default
180 seconds.
Usage Guidelines
If a router does not receive an update message from its neighbor within the route timeout period (180
seconds by default), the router assumes the connection between it and its neighbor is no longer
available.
Example
The following example sets the route timeout period to 120 seconds:
configure rip routetimeout 120
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
seconds Specifies a time in seconds.

Extreme Networks ExtremeWare Specifications

General

Vendor	Extreme Networks
Compatibility	Extreme Networks switches and routers
Type	Network Operating System
Functionality	Network management
User Interface	CLI
Protocols Supported	OSPF, BGP, RIP, VLAN, STP
Features	QoS, Security Features