Extreme Networks ExtremeWare - Configure Slb Node Tcp-Port-Check

496 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
configure slb node tcp-port-check
configure slb node <ip address>:[ftp | http | https | imap4 | ldap | nntp |
pop3 | smtp | socks | telnet | tftp | web | wildcard | www | <TCP or UDP
port number>] tcp-port-check frequency <seconds> timeout <seconds>
Description
Overrides the global default frequency and timeout values for this node.
Syntax Description
Default
The default frequency is 30 seconds.
The default timeout is 90 seconds.
Usage Guidelines
To set the global TCP-port-check frequency and timeout, use the following command:
configure slb global tcp-port-check
The frequency must be less than the timeout.
ip address Specifies the IP address of the node.
ftp Specifies the FTP TCP-port-check.
http Specifies the HTTP TCP-port-check.
https Specifies the HTTPS TCP-port-check.
imap4 Specifies the IMAP4 TCP-port-check.
ldap Specifies the LDAP TCP-port-check.
nntp Specifies the NNTP TCP-port-check.
pop3 Specifies the POP3 TCP-port-check.
smtp Specifies the SMTP TCP-port-check.
socks Specifies the SOCKS TCP-port-check.
telnet Specifies the telnet TCP-port-check.
tftp Specifies the TFTP TCP-port-check.
web Specifies the Web TCP-port-check.
wildcard Specifies any port associated with a wildcard server.
www Specifies the www TCP-port-check.
TCP or UDP port number Specifies a TCP or UDP port for the TCP-port-check.
frequency Specifies the frequency of the TCP port check. The range is 5 to 120 seconds.
timeout Specifies the timeout of the TCP port check. The range is 5 to 300 seconds.