1180 ExtremeWare Software 7.3.0 Command Reference Guide
IP Unicast Commands
configure vlan upd-profile
configure vlan <vlan name> udp-profile <profile_name>
Description
Assigns a UDP-forwarding profile to the source VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
After the UDP profile has been associated with the VLAN, the switch picks up any broadcast UDP
packets that match the user-configured UDP port number, and forwards those packets to the
user-defined destination. If the UDP port is the DHCP/BOOTP port number, appropriate
BOOTP/DHCP proxy functions are invoked.
Example
The following command assigns a UDP profile to VLAN accounting:
configure vlan accounting udp-profile port_34_to_server
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
profile_name Specifies a UDP profile name.
To Next Page
Loading...