1584 ExtremeWare Software 7.3.0 Command Reference Guide
IPX Commands
disable type20 forwarding
disable type20 forwarding {vlan <vlan name>}
Description
Disables the forwarding of IPX type 20 packets.
Syntax Description
Default
Enabled.
Usage Guidelines
Type 20 packets are NetBIOS inside IPX.
Example
The following command disables the forwarding of IPX type 20 packets for VLAN
accounting
:
disable type20 forwarding vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
To Next Page
Loading...