1936 ExtremeWare Software 7.3.0 Command Reference Guide
Power Over Ethernet Commands
unconfig inline-power usage-threshold
unconfig inline-power usage-threshold
Description
Resets the inline power usage threshold to the default value.
Syntax Description
This command has no arguments or variables.
Default
The default value for the inline power usage threshold is 70 percent.
Usage Guidelines
This command resets to default the inline power usage threshold configured with the following
command:
config inline-power usage-threshold <threshold>
Example
The following command resets the inline power usage threshold to its default value:
unconfig inline-power usage-threshold
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on Alpine series I/O modules only.
To Next Page
Loading...