Extreme Networks ExtremeWare - Enable Wireless Ports Interface Client-Scan

2058 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
enable wireless ports interface client-scan
enable wireless ports [<portlist> | all] interface [1 | 2] client-scan
Description
Enables the client scan feature on the specified wireless interface.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command enables port 1:31 and interface 2:
enable wireless ports 1:31 interface 2 client-scan
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all ports.
interface Specifies an interface: 1 or 2.