Extreme Networks ExtremeWare - Show Wireless Ports Interface Client-Scan Configuration

2088 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
show wireless ports interface client-scan configuration
show wireless ports [<portlist> | all] interface [1 | 2] client-scan
configuration
Description
Displays the current configuration of the client scan feature.
Syntax Description
Default
N/A.
Usage Guidelines
Displays the current configuration of the client scan feature, including:
Port: The port number used in the scan
Interface 1 or 2
Enabled: Y (yes) N (no)
Send Added: on | off
Send Removed: on | off
Timeout: Parameter specified for scan timeouts
Max Size: Parameter specified for the number of entries for the table
Examples
The following example displays the current configuration of the client scan feature on port 1:5 and
interface 1:
show wireless ports 1:5 interface 1 client-scan configuration
It produces output similar to the following:
Intf Enabled Send-Added Send-Removed Timeout Max-Size
-------------------------------------------------------------------------------
1:5:1 N off off 600 128
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.