Extreme Networks ExtremeWare - Configure Netlogin Redirect-Page

configure netlogin redirect-page
ExtremeWare Software 7.3.0 Command Reference Guide 791
configure netlogin redirect-page
configure netlogin redirect-page <url>
Description
Configures the redirect URL for Network Login.
Syntax Description
Default
The redirect URL default value is “http://www.extremenetworks.com”.
Usage Guidelines
In ISP mode, you can configure netlogin to be redirected to a base page after successful login using this
command. If a RADIUS server is used for authentication, then base page redirection configured on the
RADIUS server takes priority over this configuration.
You must configure a complete URL starting from either http:// or https://
This command applies only to the web-based authentication mode of Network Login.
Example
The following example configures the redirect URL as http://www.extremenetworks.com :
configure netlogin redirect-page http://www.extremenetworks.com
History
This command was first available in ExtremeWare 7.0.
Platform Availability
This command is available on all platforms.
url Specifies the redirect URL for Network Login.