configure ospf area interarea-filter
ExtremeWare Software 7.3.0 Command Reference Guide 1293
configure ospf area interarea-filter
configure ospf area <area identifier> interarea-filter [<access profile> |
none]
Description
Configures a global inter-area filter policy.
Syntax Description
Default
N/A.
Usage Guidelines
For switches configured to support multiple OSPF areas (an ABR function), an access profile can be
applied to an OSPF area that filters a set of OSPF inter-area routes from being sourced from any other
areas.
Example
The following command configures an inter-area filter policy from the access profile nosales:
configure ospf area 0.0.0.6 interarea-filter nosales
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
area identifier Specifies the OSPF target area.
access profile Specifies an access profile.
none Specifies not to apply an interarea filter.
To Next Page
Loading...