1026 ExtremeWare Software 7.3.0 Command Reference Guide
STP Commands
disable ignore-bpdu vlan
disable ignore-bpdu vlan <vlan name>
Description
Allows the switch to recognize STP BPDUs.
Syntax Description
Default
Disabled.
Usage Guidelines
By default, STP processes all of the BPDUs received on a VLAN.
Use the enable ignore-bpdu vlan <vlan name> command to allow a BPDU to traverse a VLAN without
being processed by STP, even if STP is enabled on the port. If you have a known topology and have
switches outside of your network within your STPD, use this feature to keep the root bridge within
your network.
Example
The following command disables the ignore-bpdu option on the VLAN accounting:
disable ignore-bpdu accounting
History
This command was first available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
To Next Page
Loading...
Need help?
General
