show security-profile
ExtremeWare Software 7.3.0 Command Reference Guide 935
show security-profile
show security-profile {<name>}
Description
Displays the configured parameters of the security profile.
Syntax Description
Default
All.
Usage Guidelines
Use this command to show security profiles currently configured on the platform and all values
associated with each security profile. If no security profile name is entered, configuration parameters for
all security profiles will be displayed.
Examples
The following command displays the security profile configuration for all profiles:
show security-profile
The output of the command is similar to:
Profile Name: Unsecure
ESS Name: fz-unsecure
Dot11 Authentication: open
Network Authentication: none
Encryption: none
User VLAN: Default
Use Dynamic VLAN: yes
SSID in Beacon: on
Interfaces: 180
1:1:2, 1:2:2, 1:3:2, 1:4:1, 1:4:2,
1:4:2, 1:5:1, 1:5:2, 1:5:2, 1:6:1,
1:6:2, 1:6:2, 1:7:1, 1:7:2, 1:7:2,
1:8:1, 1:8:2, 1:8:2, 1:9:1, 1:9:2,
1:9:2, 1:10:1, 1:10:2, 1:10:2, 1:11:1,
1:11:2, 1:11:2, 1:12:1, 1:12:2, 1:12:2,
1:13:1, 1:13:2, 1:13:2, 1:14:1, 1:14:2,
1:14:2, 1:15:1, 1:15:2, 1:15:2, 1:16:1,
1:16:2, 1:16:2, 1:17:1, 1:17:2, 1:17:2,
1:18:1, 1:18:2, 1:18:2, 1:19:1, 1:19:2,
1:19:2, 1:20:1, 1:20:2, 1:20:2, 1:21:1,
1:21:2, 1:21:2, 1:22:1, 1:22:2, 1:22:2,
1:23:1, 1:23:2, 1:23:2, 1:24:1, 1:24:2,
1:24:2, 1:25:1, 1:25:2, 1:25:2, 1:26:1,
name Specifies the name of an existing RF profile to be deleted.
To Next Page
Loading...
Need help?
General
