168 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
disable sntp-client
disable sntp-client
Description
Disables the SNTP client.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
SNTP can be used by the switch to update and synchronize its internal clock from a Network Time
Protocol (NTP) server. After the SNTP client has been enabled, the switch sends out a periodic query to
the indicated NTP server, or the switch listens to broadcast NTP updates. In addition, the switch
supports the configured setting for Greenwich Mean Time (GMT) offset and the use of Daylight Savings
Time (DST).
Example
The following command disables the SNTP client:
disable sntp-client
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...
Need help?
General
