show dot1p
ExtremeWare Software 7.3.0 Command Reference Guide 409
show dot1p
show dot1p
Description
Displays the 802.1p-to-QoS profile mappings.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
None.
Example
The following command displays the current 802.1p-to-QoS mappings on the switch:
show dot1p
Following is the output from this command:
802.1p Priority Value QOS Profile
0 QP1
1 QP2
2 QP3
3 QP4
4 QP5
5 QP6
6 QP7
7 QP8
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...