1160 ExtremeWare Software 7.3.0 Command Reference Guide
IP Unicast Commands
configure iparp timeout
configure iparp timeout <minutes>
Description
Configures the IP ARP timeout period.
Syntax Description
Default
20 minutes.
Usage Guidelines
A setting of 0 disables ARP aging.
Example
The following command sets the IP ARP timeout period to 10 minutes:
configure iparp timeout 10
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
minutes Specifies a time in minutes.
To Next Page
Loading...