396 ExtremeWare Software 7.3.0 Command Reference Guide
QoS Commands
disable diffserv replacement ports
disable diffserv replacement ports [<portlist> | all]
Description
Disables the replacement of diffserv code points in packets transmitted by the switch.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command disables Diffserv replacement on selected ports:
disable diffserv replacement ports 3,5,6
History
This command was available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
portlist Specifies a list of ports or slots and ports to which the parameters apply. May
be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
all Specifies that Diffserv replacement should be disabled for all ports.
To Next Page
Loading...