1540 ExtremeWare Software 7.3.0 Command Reference Guide
IP Multicast Commands
The group IP address must be in the class-D multicast address space, but should not be in the multicast
control subnet range (224.0.0.x/24).
ExtremeWare based systems do not maintain packet forwarded statistics for each source/group
combination (S,G) and cannot return that information.
Example
The following command traces the multicast group 221.160.14.23 originating at 10.10.32.14 that is
coming through the gateway at 172.16.255.1:
mtrace source 10.10.34.14 group 227.160.14.23 gateway 172.16.255.1
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...