1922 ExtremeWare Software 7.3.0 Command Reference Guide
Power Over Ethernet Commands
Following is sample output from this command:
Port Config Detect Rsvd Pwr Oper Lmt Viol Prec Label
1:1 enabled auto 0.0 15.4 max-class-operator
1:2 enabled auto 10.0 15.4 advertised-limit test_port2
1:3 enabled auto 0.0 15.4 max-class-operator
1:4 enabled auto 0.0 15.4 max-class-operator
1:5 enabled auto 0.0 15.4 max-class-operator
1:6 enabled auto 0.0 15.4 max-class-operator test_port6
1:7 enabled auto 0.0 15.4 max-class-operator
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on Alpine series I/O modules only.