show stpd
ExtremeWare Software 7.3.0 Command Reference Guide 1037
Rapid Root Failover: Disabled
Operational Mode: 802.1W
802.1Q Tag: (none)
Ports:2:5,2:6,3:1,3:2,3:3,3:4,3:5,3:6,3:7,3:8,4:1,4:2
4:3,4:4
Active Vlans: Default
Bridge Priority: 32768
BridgeID: 80:00:00:01:30:23:c1:00
Designated root: 80:00:00:01:30:23:c1:00
RootPathCost: 0 Root Port: ----
MaxAge: 20s HelloTime: 2s ForwardDelay: 15s
CfgBrMaxAge: 20s CfgBrHelloTime: 2s CfgBrForwardDelay: 15s
Topology Change Time: 35s Hold time: 1s
Topology Change Detected: FALSE Topology Change: FALSE
Number of Topology Changes: 0
Time Since Last Topology Change: 5192295s
History
This command was first available in ExtremeWare 2.0.
Support for the
detail
keyword was introduced in ExtremeWare 6.2.
Support for displaying RSTP data was introduced in ExtremeWare 7.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...
Need help?
General
