Extreme Networks ExtremeWare User Manual

show vlan stpd
ExtremeWare Software 7.3.0 Command Reference Guide 1041
6 802.1D DISABLED 4 e------- 16 16390 00:00:00:00:00:00:00:00
7 802.1D DISABLED 4 e------- 16 16391 00:00:00:00:00:00:00:00
8 802.1D DISABLED 4 e------- 16 16392 00:00:00:00:00:00:00:00
------------------------- Flags: ----------------------------
1: e=Enable, d=Disable
2: L = Loopback port
3: (Port role) R=Root, D=Designated, A=Alternate, B=Backup
4: (Config type) b=broadcast, p=point-to-point, e=edge, a=auto
5: (Oper. type) b=broadcast, p=point-to-point, e=edge
6: p=proposing, a=agree
7: (partner mode) d = 802.1d, w = 802.1w
8: i = edgeport inconsistency
History
This command was first available in ExtremeWare 6.2.2.
Platform Availability
This command is available on all platforms.

Extreme Networks ExtremeWare Specifications

General

Vendor	Extreme Networks
Compatibility	Extreme Networks switches and routers
Type	Network Operating System
Functionality	Network management
User Interface	CLI
Protocols Supported	OSPF, BGP, RIP, VLAN, STP
Features	QoS, Security Features