configure msm-failover esrp-failover-mode
ExtremeWare Software 7.3.0 Command Reference Guide 1065
For more information about ESRP and ESRP tracking, see the ExtremeWare Software User Guide.
Example
The following command configures the switch to send a notification that the standby nodes should elect
a new master as soon as possible:
configure msm-failover esrp-failover-mode rapid-reelection
History
This command was first available in ExtremeWare 7.1.1.
Platform Availability
This command is available on BlackDiamond switches only.
To Next Page
Loading...