Extreme Networks ExtremeWare - Page 1113

show elrp
ExtremeWare Software 7.3.0 Command Reference Guide 1113
Example
The following command displays summary ELRP status information on the switch:
show elrp
The following sample output is displayed:
Number of ELRP Clients = 1
Number of ELRP pkts transmitted = 69345
Number of ELRP pkts Received = 150
The following command displays detailed ELRP status information on the switch:
show elrp detail
The following sample output is displayed:
Number of ELRP Clients = 1
Number of ELRP pkts transmitted = 70305
Number of ELRP pkts Received = 150
Client VLAN Interval Count Cyclic Pkts-Xmit Pkts-Rcvd
-------------------------------------------------------------------------------
tEsrpTask uj-mas64 3 0 Yes 1095 0
tEsrpTask uj-mas63 3 0 Yes 1095 0
tEsrpTask uj-mas62 3 0 Yes 1095 0
tEsrpTask uj-mas61 3 0 Yes 1095 0
tEsrpTask uj-mas60 3 0 Yes 1095 0
tEsrpTask uj-mas59 3 0 Yes 1095 0
tEsrpTask uj-mas58 3 0 Yes 1095 0
tEsrpTask uj-mas57 3 0 Yes 1095 0
tEsrpTask uj-mas56 3 0 Yes 1095 0
tEsrpTask uj-mas55 3 0 Yes 1095 0
tEsrpTask uj-mas54 3 0 Yes 1095 0
tEsrpTask uj-mas53 3 0 Yes 1095 0
tEsrpTask uj-mas52 3 0 Yes 1095 0
tEsrpTask uj-mas51 3 0 Yes 1095 0
tEsrpTask uj-mas50 3 0 Yes 1095 0
tEsrpTask uj-mas49 3 0 Yes 1095 0
The following command displays the ELRP status information for VLAN uj-mas:
show elrp uj-mas
The following sample output is displayed:
Client VLAN Interval Count Cyclic Pkts-Xmit Pkts-Rcvd
-------------------------------------------------------------------------------
tEsrpTask uj-mas 3 0 Yes 1095 0
History
This command was first available in ExtremeWare 6.2.2b134.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.