116 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
configure snmp add trapreceiver ipaddress 10.203.0.22 port 9990 community public mode
standard trap-group extreme-traps, bgp-traps
History
This command was first available in ExtremeWare 1.0.
This command was modified in ExtremeWare 6.2.1 to support the
port
,
community
, and source (
from
)
options.
This command was modified in ExtremeWare 6.2.2 to add the
mode
options.
This command was modified in ExtremeWare 7.1.0 to add trap groups and the
version
option.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...