140 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
Use the following command to configure the user authMD5 to use
MD5
authentication with the password
palertyu:·
configure snmpv3 add user authMD5 authentication md5 palertyu
Use the following command to configure the user authSHApriv to use
SHA
authentication with the hex
key shown below, the privacy password palertyu, and
volatile
storage:
configure snmpv3 add user authShapriv authentication sha hex
01:03:04:05:01:05:02:ff:ef:cd:12:99:34:23:ed:ad:ff:ea:cb:11 privacy palertyu volatile
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...