EasyManuals Logo

Extreme Networks ExtremeWare User Manual

Extreme Networks ExtremeWare
2254 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1638 background imageLoading...
Page #1638 background image
1638 ExtremeWare Software 7.3.0 Command Reference Guide
PoS Commands
This command is currently only applicable to SONET ports. If the
no-congestion
/
congestion
keywords are omitted, the mapping is applied to the egress tables for both states. If the
egress
/
ingress
keywords are omitted, the mapping is assumed to apply to the egress direction, and a
symmetrical mapping (with the
input_codepoint
and
output_codepoint
reversed) is automatically
configured in the
ingress
direction.
Example
The following command example configures the congested-state mappings for DSCPs 10 (AF11):
configure diffserv dscp-mapping 10/12 egress congestion
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.5b20.
Platform Availability
This command is available on the BlackDiamond switch only.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Extreme Networks ExtremeWare and is the answer not in the manual?

Extreme Networks ExtremeWare Specifications

General IconGeneral
BrandExtreme Networks
ModelExtremeWare
CategorySoftware
LanguageEnglish

Related product manuals