configure qosprofile
ExtremeWare Software 7.3.0 Command Reference Guide 1661
The
minbuf
and
maxbuf
keywords are not applicable to PoS ports.
Example
The following command configures the QoS profile in the egress direction, with a minimum bandwidth
of 10 percent and a maximum of 20 percent:
config qosprofile qp8 minbw 10 maxbw 20 2:1-2:2 egress
History
This command was modified in an ExtremeWare IP Technology Services Release based on v6.1.5b20 to
support the PoS module.
Platform Availability
This command is available on the BlackDiamond switch only.
To Next Page
Loading...