1716 ExtremeWare Software 7.3.0 Command Reference Guide
T1, E1, and T3 WAN Commands
Example
The following command configures the QoS profile parameters of QoS profile qp5 for specific ports on a
T1 or E1 module:
configure qosprofile qp5 min-bps 64 k max-bps 512 k priority high ports 2:1,2:3
History
This command was available in ExtremeWare 7.1.0.
Platform Availability
This command is available for T1 and E1 modules.
To Next Page
Loading...