1866 ExtremeWare Software 7.3.0 Command Reference Guide
High Density Gigabit Ethernet Commands
Example
The following command configures the ingress QoS profile parameters of ingress QoS profile IQP1 for
slot 1, port 1:
configure qosprofile ingress iqp1 committed-rate 250 m peak-rate 1000 m red-threshold
100 % maxbuf 100 % ports 1:1
History
This command was first available in ExtremeWare 7.1.
Platform Availability
This command is available on
“3”
series I/O modules only.
To Next Page
Loading...