create application examination
ExtremeWare Software 7.3.0 Command Reference Guide 1871
Example
The following command creates an application examination rule, TCP20, which will assign ingress TCP
traffic with a destination port number of 20 to the ingress qosprofile IQP3 with a precedence value of
100:
create application examination TCP20 tcp-port 20 match dest-only iqp3 precedence 100
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on
“3”
series I/O modules only.
To Next Page
Loading...