1930 ExtremeWare Software 7.3.0 Command Reference Guide
Power Over Ethernet Commands
Example
The following command displays inline power configuration information for ports 1-8 in slot 1:
show inline-power stats ports 1:1-1:8
Following is sample output from this command:
Port State Class Absent InvSig Denied OverCurrent Short
1:1 searching ------ 0000 0
1:2 delivering class0 0000 0
1:3 searching ------ 0000 0
1:4 searching ------ 0000 0
1:5 searching ------ 1000 0
1:6 delivering class3 0000 0
1:7 searching ------ 0000 0
1:8 searching ------ 0000 0
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on Alpine series I/O modules only.
To Next Page
Loading...