show wireless ports log
ExtremeWare Software 7.3.0 Command Reference Guide 2105
[3] Jul 26 17:14:56 :2 Web netlogin mode disabled
[3] Jul 26 17:14:56 :1 Web netlogin mode disabled
[3] Jan 01 00:00:12 :2 Authentication state time updated to 600
[3] Jan 01 00:00:12 :2 Association state time updated to 600
[3] Jan 01 00:00:12 :1 Authentication state time updated to 600
[3] Jan 01 00:00:12 :1 Association state time updated to 600
[3] Jan 01 00:00:12 :2 Max association clients updated to 100
[3] Jan 01 00:00:11 :1 Max association clients updated to 100
[3] Jan 01 00:00:11 :2 Long Retry Limit updated to 7
[3] Jan 01 00:00:11 :1 Long Retry Limit updated to 7
[3] Jan 01 00:00:11 :2 Short Retry Limit updated to 4
[3] Jan 01 00:00:11 :1 Short Retry Limit updated to 4
[3] Jan 01 00:00:11 :1 Preamble mode set to SHORT
[3] Jan 01 00:00:10 :2 RTS Length updated to 2330
[3] Jan 01 00:00:10 :1 RTS Length updated to 200
[3] Jan 01 00:00:10 :2 Fragmentation Threshold updated to 2345
[3] Jan 01 00:00:10 :1 Fragmentation Threshold updated to 1200
[3] Jan 01 00:00:10 :2 Beacon Interval updated to 40
[3] Jan 01 00:00:10 :1 Beacon Interval updated to 40
[3] Jan 01 00:00:00 Wireless Port Up
[3] Jan 01 00:00:00 Boot reason: Power-on Boot
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
To Next Page
Loading...
Need help?
General
