configure debug-trace transceiver-test
ExtremeWare Software 7.3.0 Command Reference Guide 2195
07/09/2003 15:09:15.00 <Info:TRXDIAG> trxdiag: TWISTER test on BPLNE returns pass
07/09/2003 15:09:15.00 <Info:TRXDIAG> trxdiag: QUAKE test on BPLNE returns pass
The following command disables debug-trace for transceiver testing:
configure debug-trace transceiver-test 0
History
This command was first available in ExtremeWare 6.2.2b108.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.
Platform Availability
This command is available on modular switches only.
To Next Page
Loading...