ping
ExtremeWare Software 7.3.0 Command Reference Guide 2209
Example
The following command enables continuous ICMP echo messages to be sent to a remote host:
ping continuous 123.45.67.8
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 6.1 to support the
hostname
,
from
, and
with
record-route
parameters, and incremental packets.
This command was modified in ExtremeWare 6.2 to support UDP.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...