Extreme Networks ExtremeWare - Page 2215

show debug-trace
ExtremeWare Software 7.3.0 Command Reference Guide 2215
Default
N/A.
isis-hello Specifies ISIS hello level.
isis-lsp Specifies ISIS LSP level.
isis-snp Specifies ISIS SNP level.
isis-spf Specifies ISIS SPF level.
lcp Specifies LCP level.
mpls Specifies MPLS level.
mpls-signaling Specifies MPLS signaling level.
nat Specifies NAT level.
ncp Specifies NCP level.
netlogin Specifies Network Login level.
npcard Specifies NP card level
npdiag Specifies NP diagnostic level.
pim-cache Specifies PIM cache level.
pim-hello Specifies PIM hello level.
pim-message Specifies PIM message level.
pim-neighbor Specifies PIM neighbor level.
pim-rp-mgmt Specifies PIM RP level.
pppauth Specifies PPP authorization level
ppphexdump Specifies the level of the PPP hex dump.
rip-message Specifies RIP message level.
rip-route-change Specifies RIP route level.
rip-triggered-update Specifies RIP triggered update level.
slave-msm Specifies slave MSM level.
slb-3dns Specifies SLB 3DNS level.
slb-connection Specifies SLB connection level.
slb-failover Specifies SLB failover level.
snmp-trace Specifies SNMP trace level.
stp-in-pdu Specifies incoming STP PDU level.
stp-out-pdu Specifies outgoing STP PDU level.
stp-system Specifies STP system level.
t1 Specifies T1 level.
t3 Specifies T3 level.
transceiver-test Specifies transceiver-test level.
udp-forwarding Specifies UDP forwarding level.
vrrp Specifies VRRP level.
vrrp-hello Specifies VRRP hello level.
xp Specifies XP level.
vlan name Specifies a VLAN name.