2228 ExtremeWare Software 7.3.0 Command Reference Guide
Troubleshooting Commands
This command also displays the output from internal debug commands. This command disables the
CLI paging feature.
This information can be useful for your technical support representative if you experience a problem.
Depending on the software version running on your switch, additional or different show command
output is displayed.
Example
The following command displays all the show command output on the switch:
show tech-support all
History
This command was first available in ExtremeWare 6.1.9.
This command was modified to capture the
show ipmc fdb
command output in ExtremeWare 6.22.
This command was modified to provide the
brief
and
all
keywords in ExtremeWare 7.3.0
Platform Availability
This command is available on all platforms.
To Next Page
Loading...