272 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
Example
The following example selects port 3 as a tagged mirror port on a stand-alone switch:
enable mirroring to port 3 tagged
The following example selects slot 1, port 3 as the mirror port on a modular switch:
enable mirroring to port 1:3
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 4.0 to support the
tag | untagged
keywords and
modular switches.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...