show ports collisions
ExtremeWare Software 7.3.0 Command Reference Guide 287
9 R 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
10 R 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
11 R 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
12 R 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
13 R 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
14 R 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
15 R 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
16 R 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
==============================================================================
Link Status: A-Active R-Ready D-Disabled NP-Not Present LB-Loopback
0->Clear Counters U->page up D->page down ESC->exit
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 4.0 to support modular switches.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...