create fdbentry vlan ports
ExtremeWare Software 7.3.0 Command Reference Guide 365
Permanent static entries are designated by “spm” in the flags field of the
show fdb
output. You can use
the
show fdb permanent
command to display permanent FDB entries, including their QoS profile
associations.
Example
The following example adds a permanent, static entry to the FDB for MAC address is 00 E0 2B 12 34 56,
in VLAN marketing on port 4:
create fdbentry 00:E0:2B:12:34:56 vlan marketing port 4
History
This command was available in ExtremeWare 2.0.
Support for associating separate QoS profiles with ingress and egress ports was added in ExtremeWare
6.2.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...