578 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
Example
The following command displays the current flow redirect configuration and statistics for the flow
policy “flow1”:
show flow-redirect flow1
Following is the output from this command:
Service Check Timer Settings:
Ping-check Frequency: 10 Timeout: 30
TCP-Port-check Frequency: 10 Timeout: 30
Service-check Frequency: 60 Timeout: 180
Flow IPSA Mode: Enumeration Mode
http1
Proto:tcp Dest: 0.0.0.0/ 0 L4-Port: 80 Enabled: yes
Source: 0.0.0.0/ 0 # Servers Up: 0/1
Service Checking: ping
IP Address State Flow Info
24.3.89.145 Down 0000
History
This command was available in ExtremeWare 6.1.4.
Platform Availability
This command is available on all platforms.
Service Checking: Displays the configured service check type.
• ftp
• http
• L4-port
• nntp
• ping
• pop3
• smtp
• telnet
IP Address Displays the IP address of the next hop.
State Displays the status of the next hop, either up or down.
Flow Info Displays hardware mapping information.
To Next Page
Loading...