show flowstats
ExtremeWare Software 7.3.0 Command Reference Guide 709
Example
The
show flowstats
command with no options, for a switch with NetFlow statistics enabled on ports
1, 40, and 43, displays output similar to the following:
Summit48i: show flowstats
Flowstats enabled
Port Filter proto timeout group OverflowPkts flags
--------------------------------------------------------------------------------------
-------
1 1 IP 5 3 N/A EIA
DestIP: 10.203.0.1/255.255.255.255 DestPort: any
SrcIP: any SrcPort: any
40 8 - 5 1 N/A EIA
Dest/Src Info: match-all-flows
43 3 TCP 5 32 N/A EIA
DestIP: 10.0.1.1/255.255.255.254 DestPort: any
SrcIP: 10.201.32.1/255.255.255.255 SrcPort: any
Flags: E - Enable, D - Disable; I - Ingress, S - Egress; A - Aggregation
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...